Decorative Cover; Finial; Important - Craftmade Argos AG52 Instrucciones De Instalación

8
Attach Wiring Harnesses to the Wiring Harnesses in the Decorative Cover
and place the Decorative Cover to the completed Fan Motor Assembly
and securing the assembly with the Finial. Be sure to align the decorative
elements of the Decorative Cover with those of the Glass Bowl.

Decorative Cover

Wiring Harness
All manuals and user guides at all-guides.com
Step 8

Finial

9
Step 9
Position downrod so the hole in the downrod aligns with the hole in the
coupling on the motor. Insert safety bolt (S8) through coupling and
downrod and attach nut. Tighten firmly. Tighten set screw "A" against
downrod. Replace switch housing cover (6) by placing it over the
downrod and plugging in the black antenna wire. Rest the switch cover
on the motor housing (7) and turn firmly clockwise until secure. Place
canopy (3) over downrod (#2). Replace hanging ball, insert hanging pin
through downrod and tighten set screw "C" in hanging ball into
downrod.
Threaded Set
Screw Hole
Ground
Hanging
Wire
Pin
Ball Screw
Hanging
Ball
Safety Bolt
and Nut
Fan Motor Housing
WARNING: Failure to
completely tighten downrod as
described in steps 5 & 6 above
could result in the fan loosening
and possibly falling.
IMPORTANT: Black antenna wire must be connected for fan to function.
Set Screw (C)
Downrod (2)
Canopy (3)
Decorative
Downrod
Accessory
Flange Cover
Set Screw (A)