OHAUS Defender Serie Manual Del Usuario página 62

EN-32
The time interval can be set through the numeric keypad.
Settings of 1 to 3600 seconds are available. Default is 1.
Printing occurs at the defined time interval.
3.9.2.5 MT-Continuous
If MT-Continuous is selected, the print output will be in the MT-Continuous format.
CONTINUOUS = printing occurs continuously.
Note: Refer to Appendix A for MT-Continuous format.
3.9.2.6 OH-Continuous
If OH-Continuous is selected, the print output will be in the OH-Continuous format.
Note: Refer to Appendix A for OH-Continuous format.
CONTINUOUS = printing occurs continuously.
3.9.2.7 SICS
OFF = disable MT-SICS command
ON = enable MT-SICS command
Note: Refer to Appendix B for SICS commands.
3.9.2.8 Reference Balance
OFF = do not connect to reference balance
ON = connect to reference balance
Note: Use a reference balance to perform sampling with a high resolution balance in Counting Mode.
Please make sure the balance is already switched on before connected to the TD52 indicator.
3.9.2.9 Print Option
Set the way to print.
Printer = print the result through a printer.
PC = transfer the result to a computer.
3.9.2.10 Print Cal Data
Set the automatic Calibration Data printing functionality.
OFF = disabled
ON = enabled
3.9.2.11 Select Template
This sub-menu is used to define the format of the data output to a printer or computer.
Simple = only prints result and unit
Custom 1 = customized printout format. If not customized, Simple template will be used
Custom 2 = customized printout format. If not customized, Simple template will be used
Custom 3 = customized printout format. If not customized, Simple template will be used
Custom 4 = customized printout format. If not customized, Simple template will be used
Custom 5 = customized printout format. If not customized, Simple template will be used
3.9.2.12 Edit Template
This sub-menu is used to edit the current Print template. Each template supports up to 50 data fields
to define the format of the data output.
Checksum
Off = disabled
On = enabled
Defender 5000 Indicators