Introduction; Standby Interface; Use Of Dialing Function - Elari CardPhone Manual Del Usuario

Introduction

3.1. Standby interface

In the stop mode of the equipment, long press of ON/
OFF key can turn the phone on, then you can enter the
standby mode. Status bar of the standby interface shows
the Internet signal, battery capacity, message notifica-
tion icon if your short message is not read. In the case of
turning Bluetooth on a Bluetooth icon will be shown on
the screen. In the middle part of the standby interface
there is current time. If you press the up or down buttons
to select menu item in the standby interface , you can se-
lect the menu functions.
3.2. Unlock the screen
When the screen is in the locked mode, press ON/OFF key
and # key simultaneously to unlock. If it is necessary to
lock the screen, also press ON/OFF key and # key simul-
taneously.
3.3 Use of dialing function Direct dialing
For direct dialing in the standby interface, please use the
digital input of the desired telephone number for out-
going call, if the device is equipped with SIM card, it is
possible to use GSM dialing button for the outgoing call.
If the smartphone Bluetooth is connected, it is possible
to use Bluetooth dialing button for the outgoing call (the
smartphone should be equipped with SIM card, for con-
necting Bluetooth please refer to section 4.3. Bluetooth).
If there is an error in the input number, it is possible to use
the delete key located in the upper part of the keyboard
to delete the incorrect number.
98 6
Manual CardPhone_All language vers.indd 6 16.06.2015 20:14:14