TRAPP TRP 30 Manual De Instrucciones página 41

www.trapp.com.br
Additional Safety and Operation Instructions
Make sure the voltage of the power source is the

same of that of the equipment (for electric engines).
Carefully read instructions and get familiar with the

controls and proper used of the equipment.
Remember that the operator or user is responsible

for any accident or damage involving people or their
properties.
Avoid operating the equipment in humid places.

Use the equipment in a well lit environment.

Before feeding any kind of foliage, start the motor

and wait for it to reach maximum revolution.
Do not introduce anything in the equipment with

the motor off.
Do not use the equipment during periods of power

supply failure (for electric engines).
If the equipment starts to vibrate, turn it off. Check

the cause of the vibration as it indicates that the
equipment needs adjustment and repair.
Attention!
Frequently check if all screws are well
tightened, mainly the counter cutting blade
one. Always keep the counter cutting blade
adjusted to assure the good performance
of the shredder.
Check the status of the power supply cord. Never fix

it with insulating tape (for electric engine).
Never use a water jet to clean the equipment. Use

a damp cloth and detergent neutral. Water inside
the equipment can damage the electric circuit of
the motor, besides increasing the risk of an electric
shock.
Never operate the shredder with the cover open or

without the belt protection guard.
Do not allow people that are not familiarized

with the equipment to use it. The equipment may
become dangerous in the hands of people not
familiar with its operation.
Use the equipment according to the instructions

in this manual. Take in consideration the working
conditions and the service to be done.
Clean the crusher/chopper often to prevent residue

build-up, especially in the middle of the disc and
when using drier material.
Using the equipment for activities not covered in this

manual may result in dangerous situations.
The shredder TRP 40G and TRP 400G is equipped

with a four-cycle explosion motor - It does not use
oil mixed with the gasoline.
The gasoline-powered engine leaves the plant

without oil and without fuel.
Spare parts - Always call TRAPP technicians for

spare parts and maintenance services.
Do not put your hand inside of the foliage funnel.

Image for illustration purposes only
41