Choosing The Right Cookware; How To Use; Start Cooking - CORBERO CCVM400 Manual De Instrucciones

Idiomas disponibles

3.2 Choosing the right Cookware

Do not use cookware with jagged edges or a curved base.

Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the

cooking zone. Always centre your pan on the cooking zone.

Always lift pans off the ceramic hob – do not slide, or they may scratch the glass.

After power on, the buzzer beeps once, all the indicators light up for 1 second then go out, indicating that

the ceramic hob has entered the stat of standby mode.

Touch the ON/OFF

show "-"

Place a suitable pan on the cooking zone that you wish to use.

• Make sure the bottom of the pan and the surface of the

cooking zone are clean and dry.

Select a heat setting by touching the "-" or "+" control.

• If you don't choose a heat setting within 1minute, the

ceramic hob will automatically switch off. You will need to start

again at step 1.

• You can modify the heat setting at any time during

cooking.

• By holding down either of these buttons, the value will

adjust up or down.

control. all the indicators

Tabla de Contenido