KTM 93314969020 Instrucciones De Montaje página 22

5 ASSEMBLY
5.1
8
Assembly
501668-01
501670-01
501671-01
501672-01
Preliminary work
–
Allow enough time.
–
The optimum air and surface temperature is at least 18 °C.
–
Avoid working in full sunlight or strong wind.
–
Have a spray bottle with a solution of water and detergent
ready.
Assembly
–
Clean the display carefully with cleaning cloth
–
If necessary, remove dust with dust strip
–
Spray a small amount of the water solution over the display
and make sure it is evenly covered.
–
Pull the "Back" layer off the protective film.
Info
This layer is used to protect the film and is not required
during assembly.
2
(included).
4
(included).