different display options (thumbnail, slide with DLS text and full screen
slide) press the remote control.
Settings
Dynamic range compression (DRC)
Some DAB broadcasts offer dynamic range compression (DRC). This feature
allows radios to compress the dynamic range of the output audio stream, so
that the volume of quite sounds is increased, and the volume of loud sounds
is reduced. This can be useful if you are listening to music with a high
dynamic range in a noisy environment (for example, classical music while
coentering). To change the DRC setting for radio, select Menu > DRC, and
then DRC high, DRC low or DRC off.
Note: Radio DRC setting does not have any effect if DRC data is not
included in the broadcast.
Station order
You can choose the order of DAB station list to be either Alphanumeric, or
Ensemble, Ensemble lists groups of stations that are broadcast together
on the same ensemble, for example BBC or South Wales local. Valid lists
valid stations first, alphanumerically, then off-air stations. To change station
order, select Menu > Station order > then Alphanumeric or Ensemble
FM RADIO
FM radio mode receives analogue radio from the FM band and displays
RDS (Radio Data System) information about the station and show (where
broadcast). To enter FM Radio mode, either press Mode to cycle through the
listening modes until FM Radio is displayed, or select Menu > Main menu >
FM. The FM radio mode menu offers the following options:
•
Scan Settings
•
Audio Settings
•
Main Menu
Selecting stations
To find a station, press OK. The frequency display starts to run up as radio
scans the FM band. Alternatively, you can scan up or down by pressing and
holding left or right buttons or tune manually with quick presses.
Note: Scanning can be set to search for strong signals only. Preset stations
can be stored and recalled as described in Presets.
EN
57