System Settings - Schwaiger DABWORK2 513 Manual De Instrucciones

USER GUIDE
Control via Bluetooth
If your player is connected to the product via Bluetooth
via the buttons on the product:
• Next/Previous track: Turn the tuner control knob (9) to the right or left to skip to the next or pre-
vious track.
• Play/Pause: Press the tuner control knob (9) to pause or resume playback.
• Increase/decrease volume: Turn the volume control knob (9) to the right or to the left to increase
or decrease the volume on the product.
Connection via AUX IN
You can also play the sound of an external player (e.g., smartphone, MP3 player) via the AUX input of
the product. The connection is made via a 3.5 mm jack cable (not included in the scope of delivery).
1. Switch on the product as described above. Then press the mode button (2) once or several times
until you have selected the AUX IN playback mode. The text „Auxiliary input" appears in the LCD
display (6).
2. Open the cover cap (17) on the back of the product.
3. Insert one plug of a 3.5 mm jack cable into a corresponding jack on your external player. Plug the
other plug of the 3.5 mm jack cable into the AUX input (14) of the product.
4. Now control the audio playback via your external player. The sound is played back through the
product.
5. To disconnect the connection, remove the 3.5 mm jack cable from the AUX input (14) of the
product.
Charging an external device via USB
The USB charging port (15) on the back of the product is designed exclusively for charging external
mobile devices (e.g., smartphones). The current output voltage is 5 V DC, 1 A.
1. Switch on the product as described above.
2. Open the cover cap (17) on the back of the product.
3. Connect the external mobile device to the USB charging port (15) of the product using a USB
charging cable (not included).
4. The battery of your external device is now charging.
Please note that not every mobile device may be able to be charged.

SYSTEM SETTINGS

The basic system settings of the product are available in any playback mode.
To do this, first switch on the product as described above. Then press the menu button (4) and turn
the tuner control knob (9) to the left or right until the item „System" appears in the display. Select
this item by pressing the tuner control knob (9) once.
To exit the settings menu, press the menu button (4) again.
In all settings, the currently selected option is always marked with an asterisk symbol *.
®
, the following commands can be controlled
®
28