Set Backlight; Set Language; Software Upgrade - Schwaiger DABWORK2 513 Manual De Instrucciones

USER GUIDE
Turn the tuner control knob (9) to the left or right to set the day, month, and year in sequence. Con-
firm your selection by pressing the tuner control knob (9) once.
The digit that is currently being set flashes on the display.
You can also make the following settings in the „Set Time/Date" menu:
• Automatic update: Select the source from which the time is to be changed automatically. To do this,
select the option „Auto update" in the menu „Set Time/Date" by pressing the tuner control knob
(9). Then select the corresponding source.
- Update from Any: Changes the time automatically from all sources
- Update from DAB: Changes the time automatically only in DAB+ mode
- Update from FM: Changes the time automatically only in FM mode
- No update: Does not change the time automatically
• Set the time format: Select in which format the time is to be displayed. To do this, select the option
„Set 12/24 hour" in the menu „Set Time/Date" by pressing the tuner control knob (9). Then
select the format „Set 12 hour" or „Set 24 hour".
• Set the date format: Select the format in which the date is to be displayed. To do this, select the
option „Set date format" in the menu „Set Time/Date" by pressing the tuner control knob (9).
Then select the format „DD-MM-YYYY" or „MM-DD-YYYY".

Set backlight

You can adjust the duration and type of illumination of the LCD display (6) to save energy and extend
the battery life of the product.
First open the „System" menu as described above.
Then turn the tuner control knob (9) to the left or right to get to the item „Backlight". Select it by
pressing the tuner control knob (9) once. You can then make the following settings:
• Timeout: Duration after which the display illumination is switched off when not in use, 30 seconds -
45 seconds - 60 seconds - 90 seconds - 120 seconds - 180 seconds - Off
• On-Level: Brightness of the display Low – High – Medium
• Dim Level: Intensity when dimming the display Low – High – Medium
Select each option by turning the tuner control knob (9) and confirm your selection by pressing the
tuner control knob (9) once.

Set language

Use this function to set the language of the menu navigation.
1. Open the „System" menu as described above.
2. Then turn the tuner control knob (9) to the left or to the right until the item „Language" appears
on the display. Select it by pressing the tuner control knob (9) once.
3. You can now select the menu language by turning the tuner control knob (9): German - English -
Spanish - French - Italian - Dutch - Norwegian - Polish - Finnish - Danish. Confirm your selection by
pressing the tuner control knob (9) once.

SOFTWARE UPGRADE

NOTE:
A software update should not be necessary during intended use. However, if the product needs a soft-
ware update, please contact our service hotline. Never carry out software updates yourself!
If you do carry out a software update, you can reset the product as described below.
30