Solid State Logic Matrix Guia De Instalacion página 7

Power Safety
• This apparatus is supplied with a universal power supply, approved and certified for operation in this apparatus. There are no
user-replaceable fuses.
• Use only the Solid State Logic provided power supply and power cord. Use of any other power supply or power cord is not
covered by your warranty and may cause fire or explosion.
• The supplied mains cable will be coded with either of the following colour schemes:
• If an extension power cable or adaptor is used, ensure that the total power rating of the power cable and/or adaptor is not
exceeded.
• The power socket used for this apparatus should be located nearby and be easily accessible.
• Unplug this apparatus during an electrical storm or when unused for long periods of time.
Caution
• Disconnect the mains power cord before removing any panels. The power switch alone does not provide adequate isolation for
service access.
To reduce the risk of electric shock, do not perform any servicing other than that contained in these Installation
Instructions unless you are qualified to do so. Refer all servicing to qualified service personnel and ensure that all
power cords are disconnected when servicing this apparatus.
When installing or servicing any item of SSL equipment, when cover panels are removed:
HAZARDOUS CONDITIONS CAN EXIST!
These hazards include:
1
LIVE: Brown
NEUTRAL: Blue
EARTH: Yellow/Green
• High energy stored in capacitors
• High currents available from DC power busses
• Hot component surfaces
• High voltages (in power supply)
or 2
Black
White
Green
EN
DE
ES
FR
IT
JP
3