Profile 545144120 Manual De Instrucciones página 24

Mobile air conditioner 12000 BTU
545144120
Automatic mode
In AUTO mode, the COOL and FAN modes are controlled according to the room temperature and the desired
temperature.
Press the MODE button repeatedly until the AUTO mode LED lights up.
By default, the unit starts with a set point value of 23℃.
- At a temperature of ≥ 24℃, the unit operates in COOL mode.
- At a temperature between 22℃ and 24℃, the unit operates as a fan.
As long as the AUTO mode is on, the unit will turn on and off to maintain the selected temperature level.
Sleep Mode
Sleep mode can only be activated in COOL mode.
After 1 hour, the set temperature will increase by 1 ℃, after another hour, the set temperature will increase by 1 ℃.
In COOL mode :
Timer:
The timer can be operated in two ways:
To turn off the unit:
Press the timer button to activate the timer function. Press ADD/MINUS repeatedly to determine the duration.
To turn on the unit:
Press the Timer button to activate the timer function. Press ADD/MINUS repeatedly to determine the duration.
To cancel the timer: Press the ADD/MINUS button repeatedly until the LED indicates '00'. Note: The timer can also be
turned off by pressing POWER.
Automatic defrosting
At low room temperatures, frost can accumulate on the evaporator. The unit will then start defrosting automatically
(POWER LED flashes).
Overload protection
In the event of a power failure, the compressor is protected by a delay of 3 minutes until the unit restarts.
Self-evaporating system and water tank
The self-evaporating system uses the collected water to cool the condenser coils for better performance. The
condensation water evaporates at the condenser and is discharged through the exhaust hose.




Turn off the device before using it.
Remove the plug from the water
outlet and keep it in a safe place.
Connect the drain hose securely and
securely, making sure it is not kinked
or clogged.
Place the drain hose over a drain or
Remove the rubber plug.
EN - 5