Publicidad
Idiomas disponibles
Idiomas disponibles
This page contains the basic menu settings.
Select "SETUP" and press "ENTER" to access advanced settings.
The selected item is highlighted.
Press arrows "◄►" to point the cursor to the various menu items.
Select "CONFIRM" and press "ENTER" to make the changes effective.
Select "CANCEL" and press "ENTER" to cancel the changes.
Press "ESC" to go back by one step.
Press "ESC" several times until the configuration window closes to quit the configuration menu.
2.3.1
NETWORK MENU BASIC SETTINGS
2.3.1.1
Type NIC
This option is used to select the network connection type to be used.
Possible options are: "10M/100M AUTO", "10M Half- Dup", "10M Full- Dup", "100M Half- Dup" and "100M Full- Dup".
Use "▲▼" to select.
IMPORTANT NOTE
It is advisable not to change the default setting "10M/100M AUTO".
2.3.1.2
IP
This menu option is used to set the DVR IP address.
Press "EDIT" and use the number keys 0-9 to enter the IP address. Use "◄►" to shift the cursor. Press "EDIT" to cancel. Press
"ENTER" to confirm or "ESC" to cancel.
The entered IP address must not be in conflict with other IP addresses.
If there is a DHCP server in the network, address "0.0.0.0" can be set. Save and reboot the device. While rebooting, the device
will connect to the server and obtain a dynamic IP address displayed in the IP field.
IMPORTANT NOTE
It is advisable to assign a static IP address to the device.
2.3.1.3
Mac
This option can be used to display the hardware network address of the device. This address cannot be edited.
2.3.1.4
Port
This menu option is used to set the port number used for image transmission. The entered number must be higher than 2000.
The default setting is 8000.
Press "EDIT" and use number keys 0÷9 to enter the port number. Use "◄►" to shift the cursor. Press "EDIT" to delete. Press
"ENTER" to confirm or "ESC" to cancel.
2.3.1.5
Mask
Use this option to set the subnet mask of the device.
Press "EDIT" and use number keys 0÷9 to enter the mask number. Use "◄►" to shift the cursor. Press "ENTER" to confirm or
"ESC" to cancel.
2.3.1.6
Gateway
This option can be used to set the gateway of the device.
Press "EDIT" and use number keys 0÷9 to enter the address. Use "◄►" to shift the cursor. Press "ENTER" to confirm or "ESC" to
cancel.
2.4
USER MENU
Description
Access this menu to edit the default password, add (the administrator can create up to 15 users) or remove new users and define
the respective rights. Position the "Active Frame" on the "User" icon and press "ENTER".
The following window will appear:
DS1093-013
All manuals and user guides at all-guides.com
Figure 30: user menu
43
Publicidad
