Important - Tokai TC-155 Manual De Instrucciones

1. This product operates on AC230V~ 50Hz power supply. Plug the AC power
cord into a household outlet AC source.
2. Clock display will flash 0:00 until set to correct time.
POWER ON/STANDBY
1. In standby mode, tap the POWER ON-OFF button once to turn on the unit.
2. Press the POWER ON-OFF button once to return the unit to standby mode.
This unit is equipped with a battery back-up system, requiring one DC3V
CR2032 lithium battery (not included) to maintain the time settings and radio
presets during AC power outage.
1. Unscrew and remove the BATTERY COMPARTMENT COVER.
2. Install one fresh CR2032 lithium battery into the battery compartment
following the polarity diagram on the BATTERY COMPARTMENT COVER. Use
only the specified size and type of battery.
3. Replace the BATTERY COMPARTMENT COVER and tighten its screw.
Note: The unit will operate without a battery installed but your time & alarm
setting and radio presets will be lost and will have to be reset in the event of
power interruption or failure.

IMPORTANT:

Be sure that the battery is installed correctly. Wrong polarity may damage the
unit and void the warranty. For best performance and longer operating time, we
recommend the use of good quality battery.
BATTERY CARE:
- Use only the size and type of battery specified.
- If the unit is not to be used for an extended period of time, remove the
battery. Old or leaking battery can cause damage to the unit and may void
the warranty.
- Do not try to recharge battery not intended to be recharged; they can
overheat and rupture (Follow battery manufacturer's directions).
- Do not dispose of battery in fire, battery may leak or explode.
KAI TC-155.indd 16
All manuals and user guides at all-guides.com
POWER CONNECTION
INSTALLING/REPLACING THE BACK-UP BATTERY
16
15 12 14 5