General Safety Rules; Declaration Of Conformity - EdilKamin COCLEA Instalación

Dear Sir/Madam,
Congratulations and thank you for choosing our product.
Please read this document carefully before using this product in order to obtain the best performance in complete safety.
For further details or assistance, please contact the DEALER where you purchased the product or visit the TECHNICAL ASSI-
STANCE CENTRES page on our website, www.edilkamin.com .
THESE ASSEMBLY INSTRUCTIONS AND THE RELATIVE SAFETY INFORMATION MUST BE READ BEFORE AS-
SEMBLING THE PARTS.
KEEP THIS DOCUMENT NEAR THE PRODUCT FOR QUICK REFERENCING.

GENERAL SAFETY RULES

• The product must be installed in a covered area, which is free of humidity, in order to prevent problems with the electrical
equipment and to ensure the integrity of the pellets.
• The screw feeders must be used to transport wood pellets with a diameter of 6mm and a length of up to 30 mm.
• DO NOT use other fuels (solid or liquid).
• Incorrect installation, incorrect maintenance, or improper use of the product, shall relieve the Manufacturer from liability for
any damage resulting from the use of this product.
• DO NOT make any unauthorised modifications to the product as this will result in the voiding of the guarantee.
• Installation must be carried out in compliance with safety rules and standards :
- Electrical
All maintenance or installation operations must be carried out only after having disconnected the device from the mains power
supply.
Electrical connections and installation and maintenance operations must be carried out by qualified and authorised personnel.
- Fire-prevention
The rooms where our equipment is installed must comply with fire-prevention safety standards.
• Although not specifically listed, in every nation,refer to the local, national and European standards.
In Italy refer to standard UNI 11263:2007, as well as any regional regulations or local health authority standards.

DECLARATION OF CONFORMITY

The product conforms to the essential requirements of the following EEC Directives.
-EEC 89/106
- 2006/95/EC
- 2004/108/EC
Therefore, it is has the CE marking
EDILKAMIN S.p.a.
registered office in Via Vincenzo Monti 47
20123 Milan
- 8
-