Resetting; Return - Grundfos DMS Serie Instrucciones De Instalación Y Funcionamiento

4.7 Resetting

When "DEFAULT" is activated, the pump will return
to the factory settings.
Operating display
Fig. 6

4.8 Return

Fig. 7
The "RETURN" function makes it possible to return
from any level in the menu to the operating display
without changes after the menu functions have been
used.
Note: The calibration is also set back to the default
setting. This means that a new calibration is required
when the "DEFAULT" function has been used.
Operating display
without changes
13