Publicidad
Idiomas disponibles
Idiomas disponibles
PARTS LIST:
1
Revolution Bull Bar
1
Driver/left Mounting Bracket
1
Passenger/Right Mounting Bracket
4
M8 Bolt Assemblies
4
12mm Lock Washers
4
12mm x 37mm OD x 3 mm Flat Washers
Passenger/right Side
Mounting Bracket
EQUIPMENT NEEDED:
Safety Glasses
•
Ratchet Set
•
Pliers or Adjustable Wrench
•
IMPORTANT NOTES:
Bull Bar may interfere with parking sensors on the bumper.
•
For cleaning, mild soap may be used to clean the Bull Bar.
•
REMOVE CONTENTS FROM BOX, VERIFY ALL PARTS ARE PRESENT, & READ INSTRUCTIONS
•
CAREFULLY. NOTE: PROFESSIONAL INSTALLATION IS RECOMMENDED.
LIGHT BAR INSTALLATION:
1. Remove light bar from box and screw bolts and washers into each end.
2. Slide bolts into crossbeam brackets with the washers on the outside of the bracket, and tighten using the
supplied allen key.
4
12-1.75mm x 45mm Hex Bolts
1
License Plate Relocation Bracket
1
License Plate Relocation Hardware
1
LED Light Bar
1
Wiring Harness
1
I-Sheet Number 20263 Rev.A
REVOLUTION™ BULL BAR
2019 FORD RANGER
Driver/left Side
Mounting Bracket
Publicidad
