Deactivating Preprogrammed Pad; Reactivating Preprogrammed Pad - Amana RFS511MP Serie Manual De Instrucciones

Deactivating Preprogrammed Pad

1. Open oven door.
• Display shows
• Fan and light operate.
• If door is closed or
before finishing programming sequence, oven
exits programming mode.
2. Press and hold pad 1 for approximately
15 seconds.
• After 15 seconds, signal sounds. Display shows
"P".
3. Press desired number pad.
• Display shows heating time and power level
indicator (if other than 100 percent power).
4. Press hidden pad.
• " dddd " and pad number show in display.
5. Press (START) pad to save in oven memory.
• To reactivate pad, repeat steps.
6. Press (RESET) pad or close oven door to exit
programming mode.

Reactivating Preprogrammed Pad

1. Open oven door.
• Display shows
• Fan and light operate.
• If door is closed or (RESET) pad is pressed
before finishing programming sequence,
oven exits programming mode.
2. Press and hold pad 1 for approximately
15 seconds.
• After 15 seconds, signal sounds. Display
shows "P".
3. Press desired number pad.
• Display shows heating time, "COOK LEVEL" and
power level indicator (if other than 100 percent
power).
4. Press hidden pad.
• Display shows "0000" and
5. Program pad according to "Preprogrammed
Number Pads" section step 5-7.
6. Press (START) pad to save in oven memory.
• To reactivate pad, repeat steps.
(RESET) pad or close oven door to exit
7. Press
programming mode.
All manuals and user guides at all-guides.com
.
(RESET) pad is pressed
.
.
Hidden
pad
11