Chicco LITEWAY4 Manual De Instrucciones página 13

5. Fit the two fabric panels to the rear tubes by fastening
the two press studs, as shown in Fig. 5.
6. To adjust the inclination of the backrest, press the button
located on the backrest. Release the button to lock the
backrest in the nearest position (Fig. 6).
7. To raise the backrest to the desired position, simply push
it upwards (Fig. 7).
WARNING: The child's weight can make these operations
more difficult.
HOW TO ADJUST THE LEGREST
The stroller's legrest can be adjusted in 2 positions for your
child's improved comfort.
8. To adjust the position of the legrest, turn the two lateral
levers up until you reach the horizontal locking position
(fig. 8).
9. To return to the starting position, press the lateral buttons
(fig. 9).
WARNING: The legrest does not have the function to re­
tain the child.
REAR BRAKES
The rear wheels have linked brakes, which can be applied
simultaneously to the two rear wheels by using just one
pedal.
10. To apply the brakes, push one of the two levers located
at the centre of the rear wheel units in a downward di­
rection, as shown in fig. 10.
11. To unlock the braking system, push one of the two le­
vers located at the centre of the rear wheel units in an
upward direction, as shown in fig. 11.
WARNING: Always apply the brakes whenever the stroller
is stopped. Never leave the stroller on a sloped surface, with
a child inside, even with the parking brakes engaged.
WARNING: After operating the brake lever, ensure that
the brakes are correctly engaged in both of the rear wheel
units.
FRONT SWIVEL WHEELS
The stroller has front swivel/fixed wheels. It is recommend­
ed to use the wheels in the fixed mode on particularly
changeable surfaces. The use of the wheels in the swivel
mode is recommended in order to increase the control of
the stroller on a normal road surface
12. To use the front wheels in the swivel mode, push the front
lever in an upward direction with your foot, as shown in
fig. 12. To use the front wheels in the fixed mode, lower
the lever with the foot. The wheel will lock in the straight
position, regardless of its previous position.
WARNING: Both wheels must always be locked or un­
locked at the same time.
SUMMER/WINTER HOOD
13. To fit the hood, fasten the plastic clip in the appropriate
positions, as shown in fig. 13A. To complete fitting the
hood on the seat, fasten the rear part of the hood on the
back of the stroller backrest using the relevant buttons
(fig 13B).
WARNING: The hood must be fixed on both sides of the
stroller. Ensure that the hood is correctly secured into position.
14. Open the hood as shown in fig. 14A. Close the hood
pulling the front part towardS you as shown in fig. 14B.
15. The hood can become a summer sun­canopy. The rear
flap can be opened by acting on the buttons located on
the back of the backrest, rolling the fabric upwards (Fig.
15A) and fastening it with the button provided for this
purpose. (fig. 15B).
16. In order achieve complete protection, open the zipper
on the hood and pull out the rest of the textile part
(Fig.16).
FOLDING THE STROLLER
WARNING: When opening the stroller, make sure that your
child or other children are at a safety distance. Make sure
that during these operations the moving parts of the stroll­
er will not come into contact with your child Before closing
the stroller, ensure that the storage basket is empty.
17. To close the stroller, pull the rear locking mechanism
in an upward direction (fig. 17A), and unlock the pedal,
located on the right side of the stroller, with your foot
(see fig. 17B).
18. To close the stroller completely, push the handles for­
ward (fig. 18).
19. When the stroller is closed, the locking device located
on the side of the stroller will automatically lock it in the
close position (see fig. 19), therefore preventing any ac­
cidental opening of the stroller.
HOW TO REMOVE THE FABRIC COVER
The fabric cover of the stroller can be removed.
20. To remove the fabric cover, raise the legrest (fig. 20A).
Then unfasten the buckle (fig. 20B), the press studs on
the seat (fig. 20C) and the velcro straps around the low­
er part of the backrest bar (fig. 20D); remove the fabric
cover, taking care to slide the safety harness through the
appropriate hole.
21. Unfasten the press studs located on the rear tubes of
the stroller, as shown in fig. 21A. Unfasten the press stud
A and remove the two hooks B and C, located under the
fabric panel on the side of the stroller (fig. 21B). Lastly,
remove the fabric cover from the backrest, pulling it in
an upward direction. Follow the steps above in reverse
order to fit the lining again.
WARNING: Check regularly that the belt under the seat is
tensioned (fig. 20B).
If the strap is loose, tension it.
ACCESSORIES
WARNING: The accessories described below may not be
available for some versions of this product. Please read
carefully the instructions on the accessories available for
the model purchased.
STORAGE BASKET
The stroller may come with a storage basket.
22. Fasten the basket by passing the front slots through the
supports A. Fasten the velcro straps around the tubes B;
Then pass the rear straps around the tubes C and fasten
the press studs (fig. 22).
RAIN COVER
The stroller may come with a rain cover.
23. To fit the rain cover, pass the straps around the tubes of
the stroller in the positions shown in fig. 23 and fasten
the velcro on the back of the rain cover.
After use, if the rain cover is wet, let it dry in the air before
13