VALBERG WF 1014 B W180C3 Instrucciones De Uso página 20

C C
Informations pratiques Useful information
3. Put a flat container under filter door and then drain with emergency drain pipe (see [draining
residual water] for specific operation methods). Then, loosen filter anticlockwise and completely
unscrew and remove the filter.
4. Clean the filter and the filter chamber.
5. Check that the pump rotor moves freely.
6. Re-insert the filter and screwit in clockwise as far as it will go.
7. Reinstall the plinth.
1
3
Water supply hose
Check the supply hose regularly for brittleness and cracks and replace it if necessary using
a new hose of the same type(available from After-Sales Service or specialist dealer).
36 36
2
4
EN FR
C C
Useful information Informations pratiques
Mesh filter for water connection
Check and clean regularly.
For washing machines with an inlet hose as shown on pictures,
1. Close the tap and loosen the inlet hose on the tap.
2. Clean the internal mesh filter and screw the water inlet hose back onto the tap.
3. Now unscrew the inlet hose on the rear of the washing machine.
4. Pull off the mesh filter from the washing machine connection with universal pliers and ciean it.
5. Refit the mesh filter and screw the inlet hose on again.
6. Turn on the tap and ensure that the connections are completely water-tight.
A
B
37 37
C
EN FR