Publicidad
Idiomas disponibles
Idiomas disponibles
EN
48
AUX IN OPERATION
1. Use a connection lead to connect the portable audio player etc. to the
AUDIO IN socket. When using video equipment, connect the audio
output to this unit and the video output to a television.
2. Press the STANDBY button on the remote control or ON/OFF button to
turn on the power on.
3. Press the AUX/BT button on the remote control or SOURCE button
repeatedly on main unit to select AUX IN function.
4. Play the connected equipment. If volume level of the connected device
is too high, sound distortion may occur. Should this happen, lower the
volume of the connected device. If volume level is too low, increase
thevolume of the connected device.
NOTE: To prevent noise interference, place the unit away from the television
TIMER OPERATION (REMOTE CONTROL ONLY)
In this example, the clock is set for the 24-hour (0:00) display.
1. Press the STANDBY button on the remote control or ON/OFF button to
turn on the power off.
2. Press the CLOCK button (Remote control only).
3. Press the or button to select 24-hour or 12-hour display and then
press the CLOCK button.
The 24-hour display will appear.(0:00 - 23:59)
The 12-hour display will appear.(AM 12:00 - PM 11:59)
The 12-hour display will appear.(AM 0:00 - PM 11:59)
4. To adjust the hour, press the or button and then press the CLOCK
button. Press the or button once to advance the time by 1 hour.
Hold it down to advance continuously.
5. To adjust the minutes, press the or button and then press the
CLOCK button. Press then or , button once to advance the time by 1
minute. Hold it down to advance.
Publicidad
