Publicidad
Idiomas disponibles
Idiomas disponibles
10
USER MANUAL
Centrifuge CM-7S Plus
Disinfection and cleaning
ENG
Rotor and accessories must be cleaned once a week
to avoid corrosion and changes to material .
Disconnect the centrifuge from mains power sup-
ply, remove rotor, and clean it separately . The rotor,
rotor chamber, and the outside of the centrifuge
should be cleaned with a moist cloth . Only use neu-
Transportation and storage
To ensure safety during transportation, the equip-
ment should be packed in the original manufactur-
er's packaging or similar packaging substitute .
Equipment can be transported in any kind of closed
transport; make sure that equipment is tightly fixed
Warranty statements
•
Warranty applies to the 24 month period from
the date of purchasing .
•
Malfunctions that occur due to a fault of the
manufacturer, during warranty period, are re-
paired free of charge .
•
Warranty is is not valid in the following cases:
◦
If the serial number label of the manufac-
turer is damaged .
◦
If damage occurs as a result of incorrect op-
eration, transportation or storage .
•
These documents are necessary if applying for
warranty repair:
◦
User manual with serial number of the ma-
chine .
◦
Official signed report, describing the rea-
sons and circumstances of the equipment
malfunctions .
tral agents to clean these parts . To disinfect, use an
alcohol-based disinfectant (70% isopropanol/water
mixture) . If corrosive, toxic or radioactive liquids or
pathogenic bacteria are spilled in the rotor or its
chamber, the centrifuge must be decontaminated
thoroughly .
and transported accordingly to transportation reg-
ulations . Equipment should be stored in original
manufacturer's packaging in a dry room with hu-
midity no more than 80% and temperature range of
10-40°C . It is not recommended to store the equip-
ment more than 36 months .
•
Warranty repair can be performed only if the
equipment is delivered in the original manufac-
turer's packaging or equally safe packaging .
•
Before returning for warranty repair, ensure
that the device is fully cleaned, decontaminated
and does not present any kind of health risk to
our staff.
•
If the above warranty requirements are not met,
repair charges are applied to the customer .
•
For all further questions concerning usage and
maintenance, please contact the manufacturer
or product vendor .
Publicidad
