Publicidad
Idiomas disponibles
Idiomas disponibles
Detector Configuration (via Web, Local Remote
Programmer or Keypad)
Being bi-directional, the detectors parameters can be modified from the keypad or from the Remote
Programer (RP) software, as required.
Settings Configuration from the keypad
Go to the main menu and select 9)Programming> 1)Devices > 1)Zones > 11)Sensor Par.
Settings Configuration from the Remote Programmer software
Via Zone 2WRF
Configuration Parameters for EL-5835D Model
LED:
PIR Sensitivity:
MW Sensititvity
Alarm Delay
Anti-Mask
Position Sensor:
NOTE: The Disposition Sensor sends a Trouble event following change in the position of the detector.
The Anti-Mask sends a Trouble event following the covering of the detector.
* Default
Configuration Parameters for EL-5835DC Model
Camera Resolution: QQVGA 160X120 ; QVGA 320X240* or VGA 640X480
Color:
Compression:
Flash
Number of Pictures: 1 to 9 images**
Image Delay:
User Monitor
Zone Assignment
*
Default
** Default is 3 images
*** Default is 450 msec
Enable*/Disable
High/Low*
Min. 25%, 50%, 65%*, 85%, max.
Fast: The detector detects and transmits every 2.5 sec.
Normal*: The detector detects and transmits every 2.5 min.
Enable/Disable*
Enable/Disable*
Color* or B&W
High*, Low
Enable*/Disable
From 0 to 1000 msec***
Enable*/Disable
00-00-00-00 (Detection in any of the zones triggers the camera to take a
picture)
11
Publicidad
