Led Status - Risco EL-5835D Instrucciones De Instalación

mage Upon Request
I
Snapshot images can be taken using web/smartphone apps
(on panels supporting these applications) or keypad.
To test the EL-5835DC detector via the keypad:
1. Enter the Grand Master code and set the iConnect 2-Way
panel to Test mode (Quick key 7>03>5).
2. If more than one zone is defined, select a defined zone
and press '√'
3. In the displayed: ⌧ SNAPSHOTS, choose the number (1-9)
of snapshots to be taken and press '√' to transmit the
snapshots.

LED Status

LED
Yellow
Red
Green
Red/Green/Yellow
State
ON
Flashing (3 times)
Flashing
ON
ON
ON
Flashes in sequence
Description
PIR detection
Anti-Mask detection
According to RSSI strength (open tamper
registered)
Off: No connection with the panel
Not registrated (open tamper)
Alarm (closed tamper)
MW detection
For several seconds after power on
12
Figure 11