Troubleshooting; Operating Specifications - Rockwell Automation Allen-Bradley SLC 5/03 Instrucciones De Instalación

All manuals and user guides at all-guides.com
SLC 5/03™, SLC 5/04™, and SLC 5/05™ Modular Processors

Troubleshooting

Before troubleshooting your SLC 500 system, please obtain an SLC 500 Modular
Hardware Style Installation and Operation Manual (1747-6.2) from one of the
sources listed on page 5. Refer to the chapter on Troubleshooting.
In addition to the SLC 500 Modular Hardware Style Installation and Operation
Manual, the SLC 500 and MicroLogix 1000 Instruction Set Reference Manual
(1747-6.15) may also be obtained from the sources listed on page 5. This manual
contains explanations and examples for the entire instruction set as well as for all
status words and bits. It also contains explanations for all possible fault codes found
in status word S:6.
Specifications

Operating Specifications

Specification for 1747- SLC 5/03
Memory (words)
Maximum I/O Capacity
Max. Local System
Programming Instructions 99
(1)
Typical Scan Time
Bit Execution (XIC)
Programming Software
(1) The scan times are typical for a 1K ladder logic program consisting of simple ladder logic and
communication servicing. Actual scan times depend on your program size, instructions used, and the
communication protocol.
SLC 5/04
L531 L532 L541
8K 16K 16K
4096 discrete inputs / 4096 discrete outputs
3 chassis / 30 slots
1 ms/K 0.9 ms/K
0.44µs 0.37 µs
SLC 5/03s and SLC 5/04s: RSLogix 500™, PLC-500 A.I. Series™,
SLC 5/05s: RSLogix 500™
SLC 5/05
L542 L543 L551
32K 64K 16K
Publication 1747-IN009A-ML-P
11
L552 L553
32K 64K