Nevir NVR-4412 SDC Manual De Instrucciones página 17

CORRECT TRANSPORTATION AND PLACEMENT
1. Lift at the bottom when transportation, don't move it by slide the
door.
2. Keep upright and 'keep flat' stow level. Inclination between the
body and ground should be no more than
90°but no less than 45°.
3. Avoid crashing and violent vibrations during transportation.
4. Place the appliance in a dry and regularly ventilate room. Keep
away from heat emitting and oil or coal fired stoves. Behind the
appliance there should be a distance no less than 100mm, also the
two sides and above, in order to assure adequate ventilation.
5. The appliance should be placed stationary, not on foam or plastic,
etc. soft physic.
6. Don't place the appliance near substances which are inflammable
or easily eroded.
CORRECT OPERATE AND MAINTENANCE
1. A 10A safety fuse should be installed on the power supply code,
and use a single grounded socket.
2. Don't extent the power code or add other electrical load.
3. Operate the appliance emptily at the first time, turn the
temperature knob to "1-4", then the compressor start operating. Keep
operating 30 minutes, put hands both onto the outside and inside.If
hot outside and cool inside, that means the appliance work normally.