Publicidad
Idiomas disponibles
Idiomas disponibles
Multi Variable Air Conditioners Floor and Wall Mounted Type Indoor Unit
2.4.2 Installation
Secure using 6 screws for floor installations.(Do not forget to secure to the rear wall.)
For wall installations, secure the mounting plate using 5 screws and the indoor unit using 4
screws.
The mounting plate should be installed on a wall which can support the weight of the indoor
unit.
（1） Temporarily secure the mounting plate to the wall, make sure that the panel is completely
level, and mark the boringpoints on the wall.
（2）Secure the mounting plate to the wall with screws.
（3）Once refrigerant piping and drain piping connections are complete, fill in the gap of the
through hole with putty. A gap can lead to condensation on the refrigerant pipe, and drain pipe,
and the entry of insects into the pipes.
（4）Attach the front panel and front grille in their original positions once all connections are
complete.
Flaring the pipe end
（1）Cut the pipe end with a pipe cutter.
（2）Remove burrs with the cut surface facing downward so that the chips do not enter the
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
8
Publicidad
