Publicidad
Idiomas disponibles
Idiomas disponibles
Multi Variable Air Conditioners Floor and Wall Mounted Type Indoor Unit
No.
Button name
1
ON/OFF
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
5.2 Preparation before operation
When using the remote controller for the first time or after replacing the batteries, please set
the time of the system according to current time in the following steps:
Pressing CLOCK button,
Pressing
Press CLOCK button again to confirm the time and return to display current time.
5.3 Introduction of operation function
Selecting operation mode
In unit on status, press MODE button to select operation mode in following sequence:
Setting temperature
In unit on status, press
decrease setting temperature. The range of temperature is from 16℃ to 30℃.
Note: Under auto mode, manual adjustment of temperature is not needed.
Adjusting fan speed
In unit on status, press FAN button to adjust fan speed in following sequence:
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
TURBO
MODE
I FEEL
TEMP
Switch temperature displaying type on the unit's display
LIGHT
X-FAN
SLEEP
CLOCK
TOFF
TON
FAN
/
is blinking.
or
button, the clock time will increase or decrease rapidly.
button to increase setting temperature and press
Function
Turn on or turn off the unit
Set turbo function
Set operation mode
Set up&down swing status
Set I FEEL function
Set health function and air function
Set light function
Set X-FAN function
Set sleep function
Set clock of the system
Set timer off function
Set timer on function
Set left&right swing status
Set fan speed
Set temperature and time
16
button to
Publicidad
