Groups Introduction; Group; Group I; Preparing For Installation - Mobiclinic LIONFIX Manual De Instrucciones

CAR SEAT LIONFIX
ES EN FR
IT DE PT NL SWE PL DK

3. GROUPS INTRODUCTION

2.1. Group I (9-18 kg)
Use 5 anchor points, the 2 ISOFIX and the 3-point seat belt of the vehicle, in addition to the harness of the car seat. Please use
the padding included with car seat if your baby weighs less than 15kg.
2.2. Group II (15–25 kg)
Only use the 3-point seat belt. The ISOFIX system can remain anchored to the vehicle if deemed appropriate. The car seat's
harness can be removed for the comfort of the baby.
2.3. Group III (22-36 kg)
You must remove the backrest and use only the booster seat with the vehicle's seatbelt. The ISOFIX system can remain anchored
to the vehicle if deemed appropriate.

4. PREPARING FOR INSTALLATION

4.1. Check the height of the shoulder harness. (Use in Group I).
The height of the harness can be adjusted. The top part must be slightly above the shoulders of the child in order to provide an
efficient protection in the event of an accident.
.
Select the slot that is more appropriate for the child.

4.2. Fastening the harness

Join the latches on each side and insert them simultaneously in the buckle. When you hear a click it will be fastened. Please note
that the harness can only be fastened when both latches are attached.
1. 2. 3.
14