Publicidad
Idiomas disponibles
Idiomas disponibles
SKIP
(long press only if the SCAN function is activated)
This function allows you to
SCAN function. When the scan stops on an unwanted
channel, press and hold the ANL/NB key (6) for 1 second
to
store
this channel in the SCAN SKIP memory. A beep
sounds. The channel will no longer be scanned. See the
§ SCAN page 9.
Consult the SCAN SKIP menu page 15.
7) AM/FM ~ VOX SET
AM/FM
(short press)
select
This key allows you to
or FM). Your modulation mode has to correspond to
the one of your correspondent. Corresponding mode
appears on the display.
-
Amplitude Modulation / AM: communication on a field
with relief and obstacles at middle distance (the most
used).
-
Frequency Modulation / FM: for nearby communications
on a flat open field.
VOX SET
(long press)
Three parameters allow to adjust the VOX function:
Sensitivity:
/ Anti-vox level:
.
Long press the VOX key (7) to
function. The message show the current parameter :
or
.
1. Press then VOX key (7) to
skip
a channel found by the
the modulation mode (AM
/ Vox delay time:
enter
in the VOX Adjustment
select
the next parameter or...
2.
Press the UP/DN key on the microphone or the s/t key
(3) on the unit to
change
3. Once the settings done, press the PTT switch (11) to
exit
the VOX Adjustment mode. If no adjustment
and
is made for 5 seconds, the unit automatically
mode without saving.
"
-
Sensitivity "
: allows the adjustment of the microphone
(original one or optional vox) for an optimum transmission quality.
Adjustable level from1 (high level) to 9 (low level).Default value:
2
.
"
-
Anti-Vox "
: allows disabling the transmission generated
by the surrounding noise. The level is adjustable. OF (according
the squelch level) and from 0 (without anti-vox) to 9 (low level).
Default value:
Of
.
-
Delay time "
" : allows avoiding the sudden cut of the trans-
mission by adding a delay at the end of speaking. The level is
adjustable from 1 (short delay) to 9 (long delay). Default value:
1.
ox Adjustment does not automatically active the
The V
VOX function.
See the § VOX on page 12 to
VOX function.
8) EMG
(short press)
An emergency channel is selected by pressing the EMG
Key (8).The unit returns to
10). First short press to
misable channel (or the default channel 9 AM). "
,
appears on the display. Second short press to
second emergency customisable channel (or the default
channel 19 AM). "
11
the value of the parameter.
exits
activate/deactivate
CB
mode (see § CB/WX page
call
the first emergency custo-
call
" appears on the display. Third
save
the
the
"
the
Publicidad
