Publicidad
Idiomas disponibles
Idiomas disponibles
List of residual risks that remain in relation to the equipment, on-board signage
BURN
ELECTROCUTION:
SHARP FINS
CUTTING AND CRUSHING BY BODIES IN MOTION
FALL HAZARD
66
www.modinecoolers.com
The operator (in particular situations or during maintenance)
intentionally or unintentionally touches a hot or frozen
surface: if necessary use insulating gloves and/or wait for
cooling/heating of the surfaces.
Contact with live electrical parts during maintenance
operations carried out with the presence of voltage:
operations reserved for qualified and authorised operators,
equipped optionally with PPE and insulating tools - in general
turning off the power supply to the machine by placing in
the open position "O" the main switch and locking it in this
position.
The operator at the stages of use and cleaning must be
careful of the fins as they are sharp.
The operator (in particular situations or during maintenance)
must pay attention to the fans. In general disconnect the fan
by placing the safety switch located at the opening in the
open position "O".
Walking or climbing on the unit is strictly prohibited, as it can
cause damage and create a fall hazard.
Publicidad
