Reference Standards And Directives - Modine EGK Serie Manual Tecnico

The definitions of the phases of life of the equipment are described in the following table.
PHASE DESCRIPTION
Transportation It consists of transferring the equipment from one location to another through the use of sui-
table means.
Handling It consists of transferring the equipment from and on the means used for transportation and
movements within the plant.
Unpacking It involves removal of all the materials used for packaging of the equipment.
Assembly It involves all the assembly operations that initially prepare the equipment for fine-tuning.
Ordinary use
Use for which the equipment is intended (or that is considered usual) in relation to its design,
construction and function.
Adjustments These involve the adjustment, fine-tuning and calibration of all those devices which must be
adapted to the condition of operation normally envisaged.
Cleaning It involves the removal of dust, oil and residues of processing that could compromise the effi-
cient operation and use of the equipment, as well as the health and safety of the operator.
Maintenance It involves periodic verification of the parts of the equipment that can wear out and that must be
replaced.
Dismantling
It involves the complete or partial dismantling of the equipment for any type of necessity.
Demolition It involves the definitive removal of all parts of the equipment resulting from the operation of
definitive dismantling to allow the possible recycling or differentiated collection of components
according to the procedures laid down by the existing rules of law.

13. Reference standards and directives

- MACHINE DIRECTIVE 2006/42/EC
- LOW VOLTAGE DIRECTIVE 2014/35/EU
- ELECTROMAGNETIC COMPATIBILITY DIRECTIVE 2014/30/EU
- PRESSURE VESSELS DIRECTIVE 2014/68/EU, module A 2 for Cat. I or Art. 4 Par. 3,
as indicated on the PED label of the exchanger.
- ERP DIRECTIVE 2009/125/EC
- UNI EN 378:2020 REFRIGERATION SYSTEMS AND HEAT PUMPS
69
www.modinecoolers.com