The Tank Data - Vetus SENSORD Manual De Manejo Y Instrucciones De Instalación

3.3

The tank data

Data must be entered for each tank.
First of all each sensor must be given a unique
name so that it can be recognised. Choose a
name which is in agreement with the func-
tion of the tank in which the sensor is placed.
On delivery each sensor has the name 'Vetus'
and Vetus 40 l tank is entered for the type of
tank.
The corresponding volume and height are al-
ready entered for the plastic tanks from the
Vetus range; these cannot be altered.
Select a tank from the table below if a Vetus
tank is used.
Type of tank
Vetus 40 l
Vetus 42 l
Vetus 60 l
Vetus 61 l
Vetus1 88 l
Vetus2 88 l
Vetus 110 l
Vetus 120 l
Vetus 137 l
Vetus 170 l
Vetus 216 l
Vetus 335 l
Vetus 390 l
The shape, volume and height must be en-
tered for other tanks.
The volume for different heights must also
be entered depending on the shape, see the
table below.
38
090430.01
Tank height:
37 cm
29 cm
37 cm
29 cm
33 cm
37 cm
29 cm
29 cm
33 cm
40 cm
60 cm
35 cm
80 cm
Type of tank
V-shape
Irregular shape
Regular shape
Cylindrical
The names for the tanks and the corre-
sponding data are saved in the sensors, also
after switching off the power and pulling
out the plug connector.
Ultrasonic tank management system
Data to be entered
- Volume in litres
- Height in cm
- Volume in litres
- Height in cm
- Volume: at 20, 40,
60 and 80% of the
height of the tank
respectively
- Volume in litres
- Height in cm