Preparing Charger For Use; Charging The Battery, Leds; Mounting The Charger On A Wall - Stihl AL 301 Manual De Instrucciones

5 Preparing Charger for Use

heat. This may result in injury to people and
damage to property.
► Mount the charger on a wall as described in
this User Manual.
■ If the charger is mounted on a wall with the
battery inserted, the battery may fall out of the
charger. This may result in injury to people
and damage to property.
► Mount the charger on the wall first before
inserting the battery.
4.8 Transporting
WARNING
■ The charger can turn over or move while being
transported. This may result in personal inju‐
ries and damage to property.
► Disconnect the plug from the wall outlet.
► Remove the battery.
► Secure the charger with lashing straps,
belts or a net to prevent it turning over and
moving.
■ The connecting cable must not be used for
carrying the charger. The connecting cable
and the charger may be damaged.
► Wind up the connecting cable and attach it
to the charger.
4.9 Storage
WARNING
■ Children are not aware of and cannot assess
the dangers of a charger. Children can be seri‐
ously injured or killed.
► Disconnect the plug from the wall outlet.
► Store the charger out of reach of children.
■ The charger is not protected against all ambi‐
ent conditions. If the charger is exposed to
certain ambient conditions, the charger may
be damaged.
► Disconnect the plug from the wall outlet.
► If the charger is hot: Allow the charger to
cool down.
► Store the charger in a clean, dry place.
► Store the charger in an enclosed room.
► Store the charger at temperatures between
+ 5 °C and + 40 °C.
■ The connecting cable should not be used for
carrying the charger or hanging up the
charger. The connecting cable and the
charger may be damaged.
► Hold the charger by the housing in a secure
grip. The charger is provided with a handle
recess to make it easy to pick up the
charger.
► Hang the charger on the wall mounting.
0458-010-9921-A
4.10 Cleaning, Maintenance and
Repair
WARNING
■ Harsh detergents, cleaning with a water jet or
sharp objects can damage the charger. If the
charger is not cleaned correctly, components
may no longer function properly or safety devi‐
ces may be rendered inoperative. They may
cause serious injury to persons.
► Clean the charger as described in this User
Manual.
■ If the charger is not serviced or repaired cor‐
rectly, components may no longer function
properly or safety devices may be rendered
inoperative. This may result in serous or fatal
injury to people.
► Do not attempt to service or repair the
charger.
■ If the connecting cable is faulty or damaged:
► Have the connecting cable replaced by a
STIHL dealer.
5 Preparing Charger for Use
5.1 Preparing Charger for Use
Perform the following steps before starting work:
► Make sure the charger is in a safe condition,
4.5.
► Clean the charger,
► If you cannot carry out this work: Do not use
the charger and contact your STIHL servicing
dealer.
6

Charging the Battery, LEDs

6.1 Mounting the Charger on a
Wall
The charger can be mounted on a wall.
1 2
c
b
a
English
9.1.
3
e
d
f
f
13