Ansodo PZ-001MF Manual De Instrucciones página 7

MAX
MAX
MIN
I.Heating and frothing thick milk foam. Indicator turns red. (For
a cappuccino or macchiato)
1.Open the lid and attach the frothing whisk inside the jug. (Fig 1,
Fig 2)
2.According to the scale inside the jug, add an appropriate
amount (up to 115ml)
permitted for frothing to add is 115ml, to avoid milk overflowing
while frothing.) (Fig 3, Fig 4)
3.Make sure the lid is placed on the jug before frothing. (Fig 5)
4.Place the jug on the power base and connect the plug into a
power outlet. (Fig 6)
5.Press the button once.
whisk will rotate for frothing thick milk foam. And the appliance
will automatically stop rotating when finishing. The red indicator
light is off. It may take 90s-120s. The temperature of milk frother
has achieved about 65±10℃.
6.When the appliance stops operating, open the lid, pour out the
warm and frothed milk to enjoy it.
7.Always disconnect the power supply when not in use.
II.Heating and frothing thin milk foam. Indicator turns purple.
(For a latte)
1.Open the lid and attach the frothing whisk inside the jug. (Fig 1,
Fig 2)
2.According to the scale inside the jug, add an appropriate
amount (up to 115ml)
permitted for frothing to add is 115ml, to avoid milk overflowing
while frothing) (Fig 3, Fig 4)
3.Make sure the lid is placed on the jug before frothing. (Fig 5)
4.Place the jug on the power base and connect the plug into a
power outlet. (Fig 6)
5.Double-press the button.
frothing whisk will rotate for frothing thin milk foam. And the
appliance will automatically stop rotating when finishing. The
purple indicator light is off. It may take 90s-120s. The temperature
of milk frother has achieved about 65±10℃.
6.When the appliance stops operating, open the lid, pour out the warm
MAX
MAX
MIN
of milk . (Note: the max milk quantity
The indicator will turn
of milk . (Note: the max milk quantity
The indicator will turn purple. The
-05-
red. The frothing