Setting Date, Time And Levels - Invacare ISG4002647 Manual Del Propietário

Setting Date, Time and Levels

Setting date and time
a.
Press "MODE" button ("month" starts flashing)
Press "[ ]" and "[ ]" button to set and adjust the correct
month (1, 2, 3 ....12)
b.
Press "MODE" button again ("date" starts flashing)
Press "[ ]" and "[ ]" button to set and adjust the correct
date
c.
Press "MODE" button again ("hour" starts flashing)
Press "[ ]" and "[ ]" button to set and adjust the correct
hour in 12-hour format. A "PM" will appear for PM and dis-
appear for AM.
d.
Press "MODE" button again ("minute" starts flashing)
Press "[ ]" and "[ ]" button to set and adjust the correct
minute (00, 01, 02 ...59)
After setting the minute you will automatically be prompted to
set the personalized level for Memory Zone 1. The storage of
120 memory readings is divided into 3 memory zones, each
maintaining up to 40 memory readings. The following explains
how to set your personalized level in each zone.
Your personalized level should be decided between you
and your healthcare provider.
Before setting your levels it is important to know:
*Your systolic rate is set between 70 and 250 mmHg.
*Your diastolic rate is set is between 40 and 115 mmHg.
16
Setting Date, Time and Levels
All manuals and user guides at all-guides.com