Zones Of 40 Memory - Invacare ISG4002647 Manual Del Propietário

Storing, recalling, and erasing
measurement data
•
Erasing data
*Press "MEMORY" into Memory mode.
*Press and hold on "MODE" button and then press " " button, the
pre-set Personal Alert Level and all measurement data will be erased.
*To confirm the data has been erased, press the "MEMORY" button
and no data should appear.

3 Zones of 40 Memory

When you take a measurement, the monitor automatically stores it in
memory space number one. As you continue to take measurements, the
monitor will push the previous measurement back one space. In other
words, the value in space one will always be the most recent blood pres-
sure measurement taken.
Your monitor features a 3 party memory capability or 3 "zones" - each
zone stores 40 measurements each for a total capacity of 120 measure-
ments. This feature is useful for a user to track their blood pressure
throughout the various periods of the day: morning, afternoon, and night.
Press the " " button to toggle between memory zone No.1, 2, and 3.
Once you select a zone that you want to view the measurements in,
press the " MEMORY " button once to view the most recent measure-
ment along with the time and date that it was taken. Press the " MEM-
ORY " button again in succession and you will see all of the measure-
ments registered to that zone. You can then press the " " button to
switch to the next zone to view measurements. The monitor will auto-
matically power off after about one minute of inactivity.
*When taking measurements, be sure and select the correct zone
number using the " " or " " button so that the measurement is reg-
istered to the appropriate zone.
20
Storing, recalling, and erasing measurement data/3 Zones of 40 Memory
All manuals and user guides at all-guides.com