Specifications - Phasak PH 9260 Manual De Uso

6. Specifications

EN
MODEL
CAPACITY *
INPUT
Low Line Transfer
Voltage
Range
Low Line Comeback
High Line Transfer
High Line Comeback
Frequency Range
Phase
Power Factor
OUTPUT
Output voltage
AC Voltage Regulation (Batt. Mode)
Frequency Range
(Synchronized Range)
Frequency Range (Batt. Mode)
Overload
Current Crest Ratio
Harmonic Distortion
AC Mode to Batt. Mode
Tempo
trasfer
Inverter to Bypass
Waveform (Batt. Mode)
EFFICIENCY
AC Mode
Battery Mode
BATTERY
Battery Type
Numbers
Standard
Recharge Time
Model
Charging Current
Charging Voltage
PHYSICAL
Dimension, Pr X An X Al
Tower
Net Weight (kg)
ENVIRONMENT
Operation Humidity (non-condensing)
Noise Level
MANAGEMENT
Smart RS-232 or USB
Optional SNMP
* Derate capacity to 60% of capacity in Frequency converter mode and to 80% when the output voltage is adjusted to 208VAC.
48
PH 9260
Uninterruptable Power Supply
160VAC/140VAC/120VAC/110VAC± 5 %
(based on load %: 100% - 80 % / 80 % - 70 % / 70 - 60 % / 60 % - 0)
300 VAC ± 5 % or 150 VAC ± 5 %
290 VAC ± 5 % or 145 VAC ± 5 %
≧ 0.99 @ 220-230 VAC or 110-120 VAC
50 Hz ± 0.25 Hz or 60Hz ± 0.3 Hz
110%-130%: UPS shuts down in 30 seconds at battery mode or transfers to bypass mode
>130%: UPS shuts down immediately at battery mode or transfer to bypass mode when
8 hours recover to 90% capacity (Typical)
Supports Windows® 98/2000/2003/XP/Vista/2008/ 7, Linux, Unix and MAC
Power management from SNMP manager and web browser
PH 9260
6000 VA / 4200 W
175 VAC ± 5 % or 85 VAC ± 5 %
40Hz ~ 70 Hz
Single phase with ground
208/220/230/240VAC
± 3%
47 ~ 53 Hz o 57 ~ 63 Hz
100%~110%: audible warning
when the utility is normal.
the utility is normal.
3:1
≦ 4 % THD (linear load)
≦ 7 % THD (nonlinear load)
Zero
4 ms (Typical)
Pure Sinewave
~ 90%
~ 85%
12 V / 10 AH
8
1.0 A(max.)
109.4 VDC ±1%
426 X 190 X 318 (mm)
35.3
20-90 % RH @ 0- 40°C
< 55dBA @ 1 meter
Segurança e harmonia
ININTERRUPTA