Cleaning And Maintenance - Gymrex GR-AB 250 Manual De Instrucciones

All joints of the device must be properly fastened and tightened.
After all the above-mentioned assembly steps have been completed, you may start
working with the device.
To adjust the working position, remove the adjustment lock and raise or lower the
seat/back and lock again.

3.3. Cleaning and maintenance

a) Use only non-corrosive cleaning agents for cleaning the surfaces.
b) After each cleaning, all the parts should be dried well before the device is used
again.
c) Store the unit in a dry and cool place protected from moisture and direct
sunlight.
d) Do not spray the unit with a stream of water or immerse it in water.
e) Perform regular inspections of the unit checking technical fitness and any
damages.
f) Use a soft cloth for cleaning.