Installation; Unpacking The Product; Installation Conditions; Installation Position - Bosch rexroth LG 2/H Instrucciones De Montaje

18/44

Installation

1 2
Bosch Rexroth AG, MIT: Liftgate, 3 842 358 734/2015-01
7 Installation

7.1 Unpacking the product


Lift the product from its packaging.

Dispose of the packaging material in accordance with the national laws of your
country.

7.2 Installation conditions


During installation the ambient conditions specifi ed in the technical data
(see page 43) must be maintained.
7.2.1

Installation position


Install the product at right angles and parallel to the axis. This ensures proper
functioning and prevents premature wear and tear.
7.2.2

Fixing with T-head bolts

• Mount the transfer systems TS 1, TS 2plus, TS 2pv, TS 4plus, TS 5 and the chain
conveyor systems VarioFlow and VarioFlow S with T-head bolt and collar nut.
• When inserting and tightening, make sure the T-head is in the correct position
in the collar nut. The notch at the end of the screw indicates the position of the
T-head.

1 = insertion position of the T-head bolt into the nut

2 = clamping position of the T-head bolt into the nut

Tightening torque 25 Nm

7.3 Required tools

• Hex key SW13
• Hex socket head cap screw SW3, SW4, SW5
• Internal Torx screw key T30, T50
• Phillips screwdriver PZ2
• Hammer
• Spirit level