Hozelock Select Plus 2224 Manual De Instrucciones página 8

8
CONNECTING THE TIMER TO THE TAP
Use the supplied adaptors if required. Hand tighten firmly
CONNECTING THE TIMER TO THE TAP
to ensure there are no leaks. Do not use a wrench or other
Use the supplied adaptors if required. Hand tighten firmly to ensure
tool to tighten the nuts as this can permanently damage the
there are no leaks. Do not use a wrench or other tool to tighten the
plastic components.
nuts as this can permanently damage the plastic components.
This product is not designed to be used in
sub-zero (frost) temperatures. During winter
This product is not designed to be used in sub-zero (frost)
months drain any remaining water out of
temperatures. During winter months drain any remaining
your timer and bring it indoors until the next
water out of your timer and bring it indoors until the next
watering season. Remove the batteries from
watering season. Remove the batteries from the front
the front panel if you do not intend to use it for
panel if you do not intend to use it for long periods.
long periods.
PROBLEM
Valve opens and closes when Your Select Plus Timer has
Valve opens and closes when
batteries are first inserted detected low battery power.
batteries are first inserted but
but then fails to operate Replace with new batteries.
then fails to operate when
when watering manually or
watering manually or
automatically.
automatically.
Your Select Timer has detected
The screen displays "BATT"
The screen displays "BATT"
low battery power. Replace with
new batteries.
Valve operates but no water Check your tap is turned on.
Valve operates but no water
flows.
flows.
Valve works on manual but Check that the P1, P2 or P3
Valve works on manual but no
programs are turned on.
no auto Run (automatic)
Auto Run (automatic) watering.
watering.
When I press the water now
Make sure the front panel is fully
When I press the water now
button the valve does not
inserted into the valve body.
button the valve does not
operate.
operate.
TECHNICAL DATA
TECHNICAL DATA
Operating Pressure
Operating Pressure
Operating
Operating Temperature
Temperature
Maximum water
Maximum water temperature
temperature
SOLUTION
Your Select Plus Timer has
detected low battery power.
Replace with new batteries.
Your Select Timer has detected
low battery power. Replace with
new batteries.
Check your tap is turned on.
Check that the P1, P2 or P3
programs are turned on.
Make sure the front panel is fully
inserted into the valve body.
0.1 – 10Ba r
0.1 – 10Bar
1 - 55°C
1 – 55°C
30°C
30°C