Publicidad
Idiomas disponibles
Idiomas disponibles
SHINE reserve parachute's manual SHINE
2. Reserve parachute/harness connection with SDT separate risers.
>> Risers to harness connection using a loop to loop ( Lark's head ) knot.
1.
- Unfasten the
2.
- Attach each riser to the shoulder attachment points by
Velcros located
making a Lark's knot ( loop to loop connection ). Use the larg-
alongside the
est bridle loop ends.
shoulder protective
sleeves to reach the
reserve parachute
shoulder straps
connection loops.
>> Separate riser reserve parachute connection.
One (1) square 7mm Maillon Rapide® will be needed + two (2) flexible toric rings.
1.
- Open the 7mm
2.
- Push the end riser
square Maillon Rapi-
through the toric ring.
de®.
- Push the maillon
- Connect the reserve
through the risers
parachute single riser
buckles.
loop.
- Push the maillon
through the toric ring
- Twist
Connecting the reserve parachute to the harness
4.
- Repeat steps 1 through
3.
- FGive a second
twist to the toric ring.
3 with the second riser..
- Push the buckle
through the maillon.
3.
-
Tidy up the assembly.
- Make sure for the risers not to be longer than
one another.
- Tighten each connection securely.
5.
-
Tidy up the assembly.
- Make sure for the risers not to
be longer than one another.
- Close the Maillon Rapide®
tightly by hand.
- Tighten using pliers and mak-
ing a ¼ turn.
SUP'AIR
_SHINE
Page 11
Publicidad
