2
Press
when finished.
While using
The remaining battery
capacity are shown and
then turn off after
5 seconds.
• Approximate amount of
battery capacity is
displayed as 20 ‑ 100.
• The shaving sensor
lamp ( ) blinks.
When the battery capacity is low
"20" blinks when operating the shaver.
• You can shave 2 to 3 times after "20" blinks.
(This will differ depending on usage.)
Notes
• The appliance may not operate in an ambient
temperature lower than approximately 5 °C.
• The shaving sensor may not respond depending on
the type and quantity of the shaving gel. This is not
abnormal.
ES-LV6U_EU.indb
15
After use
The remaining battery
capacity blink and then
turn off after 5 seconds.
• Depending on the beard thickness or the amount of
beard trimmings in the shaver head, the shaving
sensor may not react and the driving sound may not
change. This is not abnormal.
• To prevent erroneous operation, place your fingers on
the finger rest while using the shaver.
• The sonic vibration cleaning mode is activated when
the power switch is pressed for more than 2 seconds
while the shaver is not operating. (See page 17.)
You cannot shave in this mode.
Operation and display of the switch lock
►Locking the power switch
1. Press
once
2. Press
and then release.
than 2 seconds
• The shaver
until the switch
starts
lock lamp ( )
operating.
turns on.
• The shaver will
stop operating.
for more
3. Release
.
• The switch
lock lamp
( ) will
light up for
5 seconds
and turn off.
15
2021/12/07
21:15:25