Use the plastic screw to secure the fan blades.
4
Note: turn the screw anticlockwise firmly to
secure it.
Fit the front grill and rotate it a little, clockwise,
5
until the arrow on the grill lines up with the
left-side marker.
Fit the supplied screw to the underside of the
6
grill and connect the two halves firmly together.
Installing the remote control
Remove the lid
1
Place the battery according to the instructions
2
on the lid with the correct polarity
Close the lid
3
Note:
• Only use 1x CR2025 3V batteries
• Non-rechargeable batteries are not to be
recharged
• Exhausted batteries are to be removed from the
remote control and safely disposed of
• If the remote control is to be stored unused for a
long period, the battery should be removed
• The supply terminals are not to be short-circuited.
• Only use detachable power adapter GM42-
120300-x*A (*x stands for type of power plug).
GM42-120300-3A (UK plug) GM42-120300-2A (EU
Plug).
7