Installation Concerns
2
1
3
2
1
3
Use Side Impact Protection
see images
-
1
2
1. The enhanced child restraint is delivered with removable side impact
protection. This side impact protection must be used on the door side of the
vehicle for best protection. Installation shown in
2. Press the release button to remove side impact protection.
14
1
-1
-2
2
2
&
Recline Adjustment
see images
-
3
4
Press the recline adjustment handle, and adjust the enhanced child restraint
to the proper position.
3
The recline angles are shown as
4
There are two recline angles 5-6 for rearward facing mode.
There are four recline angles 1-4 for forward facing mode.
Align the top reclining indicator with the bottom numbers for the desired
recline position.
Height Adjustment
for Head Support and Shoulder Harnesses
-
see images
5
7
!
When used in rearward facing mode, the shoulder harness height must be
even with or just below the top of child's shoulders.
!
If the shoulder harnesses are not at proper height, the child may be thrown
from the enhanced child restraint in case of an accident.
!
When used in forward facing mode, the shoulder belt guides must be even
with or just above the child's shoulders.
1. Please adjust the head support and shoulder harnesses to proper height
according to the child's height.
2. Squeeze the head support adjustment lever
push down the head support until it clicks into one position. The head
support positions are shown as
!
As the headrest is adjusted up (from 6th-9th position), the sides of the child
restraint automatically move outward to provide more shoulder room.
Rearward Facing Mode
(Child height 40cm-105cm/ Child weight ≤ 22kg)
see images
-
8
18
!
Please install the child restraint on the rear vehicle seat, and then put the
child in the child restraint.
5
6
7
-1, meanwhile pull up or
-2
7
15