Operating Instructions; Dishwasher Features; Product Description; Control Panel - Kunft KDW4752 Manual De Instrucciones

2. OPERATING INSTRUCTIONS

2.1. Product Description

Control Panel

6 7 11 9 10 8
A++
KDW4752
1 2 3 4 5
1. Power switch: Turn on/off the power supply.
2. Programme select button: Press the button to select the
program.
3. Half_Load / Dry + Button: Press this button you can
choose the additional function Half_Load, Dry +, Half_Load and
Dry +.
4. Delay button / Child lock button: The START DELAY will
allow you to delay the start time of any cycle automatically up to
24 hours. The "child look" will be available when you press the
button 3 seconds and the "LO" flashes 6 times on digital displays.
5. Start / pause button: The appliance will start or pause the
expected washing cycle.
6. Program indicator light: Lights up the corresponding washing
programme selected.
7. Half_Load indicator: The Half Load Indicator lights up when
the Half Load additional function be selected.
8. Dry + indicator: The Dry+ indicator lights up when the extra
dry function be selected.
9. Rinse aid refill indicator: The indicator lights up when rinse
aid dispenser needs to be refilled.
10. Salt refill indicator: The indicator lights up when the salt
needs to be refilled.
11. Digital display: To display the running time remain, malfunction
codes and delay time.
12
dishwasher

Dishwasher Features

2.2. Product usage

Installation
Keep this instruction manual in a safe place for future reference.
If the appliance is sold, given away or moved, please make sure the
manual is kept with the machine, so that the new owner may benefit
from the advice contained within it.
Please read this instruction manual carefully: if contains impor-
tant information regarding the safe installation, use and maintenan-
ce of the appliance.
If the appliance must be moved at any time, keep it in an upright
position; if absolutely necessary, it may be tilted onto its back.
Positioning and levelling
1. Remove all appliance packaging and check that it has not been
damaged during transportation. If it has been damaged, contact
the retailer and do not proceed with the installation process.
2. Check the dishwasher by placing it so that its sides or back panel
are in contact with the adjacent cabinets or even with the wall. This
appliance can also be recessed under a single worktop.
3. Position the dishwasher on a levelled, sturdy floor. If the floor is
uneven, the front feet of the appliance may be adjusted until it
reaches a horizontal position (the angle of inclination must not
exceed 2 degrees). If the appliance is levelled correctly, it will be
more stable and much less likely to move or cause vibrations and
noise while it is operation.
EN
KDW4752
Front View
1. Upper Basket
2. Spray Arms
3. Lower Basket
4. Water Softener
5. Cutlery Basket
6. Detergent Dispenser
7. Rinse Aid Dispenser
13