Royal Catering RCVG-47 Manual De Instrucciones página 6

EN
f) In case of open flames or fire, use only dry powder or
snow (CO2) fire extinguishers to extinguish the live
equipment.
g) No children or unauthorized persons are allowed
in the work area. (Inattention may result in loss of
control of the unit.)
h) Use the appliance in a well-ventilated area.
i) Check the condition of the safety stickers regularly.
Replace them if they are illegible.
j) Keep these instructions for use for future reference.
If the unit is to be passed on to a third party, the
operating instructions must also be handed over
together with the unit.
k) Keep the packaging and small assembly parts out of
the reach of children.
l) Keep the unit away from children and animals.
m) When using this unit together with other units, also
follow the other instructions for use.
2.3. PERSONAL SAFETY
a) Do not operate this unit if you are tired, ill or under
the influence of alcohol, drugs or medication that
could impair your ability to operate the unit.
b) The unit is not intended to be used by persons
(including children) with reduced mental, sensory or
intellectual functions or persons who lack experience
and/or knowledge unless they are supervised or
have been instructed by a person responsible for
their safety on how to operate the unit.
c) Use caution and common sense when operating this
appliance. A moment's inattention during operation
may result in serious personal injury.
d) The unit is not a toy. Children should be watched to
ensure that they do not play with the unit.
e) Do not place your hands or any objects inside the
running appliance!
2.4. SAFE USE OF THE UNIT
a) Do not overload the unit. Use tools that are suitable
for the application. A correctly selected unit will do a
better and safer job for which it was designed.
b) Do not use the appliance if the ON/OFF switch does
not function properly (does not turn on and off).
Units that cannot be controlled by the switch are
unsafe, cannot operate, and must be repaired.
c) Unplug the unit before making adjustments,
changing accessories, or putting it away. This
precaution reduces the risk of accidental start-up.
d) Disconnect the unit from the power supply before
adjusting, cleaning, or servicing. This precaution
reduces the risk of accidental start-up.
e) Keep unused equipment out of the reach of children
and out of the reach of anyone unfamiliar with
the unit or this instruction manual. These units is
dangerous in the hands of inexperienced users.
f) Keep the unit in good working condition. Check
before each use for general damage or damage to
moving parts (cracks in parts and components or any
other condition that may affect the safe operation of
the unit). If damaged, have the unit repaired before
use.
g) Keep the unit out of the reach of children.
h) Repairs and maintenance should be carried out by
qualified personnel using only original spare parts.
This will ensure the safety of use.
10
i) To ensure the designed operational integrity of
the unit, do not remove factory-installed covers or
loosen screws.
j) When transporting or moving the unit from storage
to the place of use, observe the health and safety
rules for manual handling applicable in the country
where the unit is used.
k) Do not touch any moving parts or accessories unless
the unit is unplugged.
l) Do not move, shift, or rotate the machine while in
operation.
m) Do not leave the unit switched on unattended.
n) Clean the unit regularly to prevent permanent dirt
build-up.
o) Do not process two workpieces at the same time.
p) Do not obstruct the air inlet or outlet.
q) The unit is not a toy. Cleaning and maintenance
must not be performed by children without adult
supervision.
r) Do not start up an empty unit.
s) Do not tamper with the unit to alter its performance
or design.
t) Keep the unit away from sources of fire and heat.
u) Do not overload the unit.
v) Do not block the ventilation openings of the
appliance!
CAUTION! Although the product has been
designed to be safe, with adequate safeguards,
and despite the addtional safety features provided
to the user, there is still a slight risk of accident or
injury when handling the unit. You are advised to
use caution and common sense when using this
product.
3. RULES OF USE
The vacuum packaging machine is intended solely for
vacuum packaging of suitable food products or other items
suitable for such packaging.
The user is responsible for any damage resulting from
misuse.
3.1. DESCRIPTION
REGARDS BOTH MODELS:
1
2
3
4
Rev. 14.07.2020
5
7 6
1. Cover
2. Lock
3. Control panel
4. Pressure Meter
5. Rear casing
6. Oil window cover
7. Electrical socket
CONTROL PANEL
RCVG-47
G H
F
Vac Time
Seal Tim e
A B C D
E
ON/OFF Start Seal Se t
RCVG-46
G H
Vac Time
F
Seal Tim e
Marinate
A B C D
E
ON/OFF Start Seal Se t
A. ON/OFF button
When the unit is plugged in, the LED display (G) will
show „OFF", press the „ON/OFF" button, the LED
display (G) will show the time (last setting).
Now the unit is ready for operation.
After using the unit, press the „ON/OFF" button
before disconnecting the unit from the power
supply.
While the unit is running, press the „ON/OFF" button
to stop all processes.
B. Automatic Sealing (START) Button
After closing the lid, if the machine cannot operate
automatically, press the START button.
The unit will automatically perform extraction and
sealing.
Rev. 14.07.2020
EN
C. SEAL button
Press the SEAL button to stop the vacuum sealing
cycle and immediately seal the bag to prevent
crushing of fragile items.
D. SET button
With the lid open, press the SET button to activate
the vacuum seal time and marinating time settings.
Press the „∨ " or „∨ " button to set the time of each
setting.
E. Pressure indicator
Shows the pressure level inside the vacuum chamber.
F. Indicator light
The light will come on when:
1. When the lid is open, it gives us a signal that the unit
is ready for operation.
2. When the sealing and sealing is completed or when
the on button is pressed.
3. If the lid of the machine is not open and the display
shows „CLO".
H. Time adjustment button („∨ " „∨ ")
When the cover is open, press the „∨ " or „∨ " button
to adjust the time of each setting.
BACK OF THE UNIT MODEL RCVG-47 - OIL PUMP
1
2
3
1. Oil cap (fill)
2. Oil pump
3. Oil immersion lens
3.2. PREPARATION FOR OPERATION
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and
ambient humidity should not exceed 85%. Place the
unit in a way that ensures good air circulation. Maintain
a minimum clearance of 10 cm from any wall of the unit.
Keep the unit away from any hot surfaces. Always operate
the unit on a level, stable, clean, fireproof and dry surface
and out of the reach of children and persons of impaired
mental, sensory and intellectual functions. Place the unit in
such a way that the mains plug can be reached at any time.
Ensure that the power supply to the unit corresponds to
that specified on the identification plate!
Before using the unit for the first time, disassemble all parts
and wash them as well as the entire unit.
11