Operation; Description Of The Appliance; Before Startup - Kärcher K 4.800 eco!ogic Manual De Instrucciones

Operation

Description of the Appliance

These operating instructions describe the
maximum equipment. Depending on the
model, there are differences in the scopes
of delivery (see packaging).
Illustrations on fold-out page!
1 Coupling element for water
connection
2 Suction hose
3 Quick coupling for high pressure hose
4 Storage for trigger gun
5 Water connection with integrated sieve
6 Appliance switch (0/OFF – 1/ON eco).
7 Dosage regulator for detergent
8 Storage for trigger gun
9 Transport handle, detachable
10 Storage for high pressure hose
11 Storage of Plug 'n' Clean detergent bot-
tle with detergent connection
12 Storage for accessories
13 Plug 'n' Clean detergent bottle with
locking lid
14 Mains cable with mains plug
15 Wheels
16 Trigger gun
17 Lock trigger gun
18 Key to detach the high pressure hose
from the trigger gun
19 High pressure hose
20 Spray lance with Dirtblaster
21 Spray lance with pressure regulation
(Vario Power)
Optional
22 Water filter (order no. 4.730-059)
Special accessories
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.
18
All manuals and user guides at all-guides.com
EN
Switch position "eco"
There are the switch positions "1/ON" and
"eco" to switch the appliance on.
Note: The switch position "eco" allows the
control of pressure and leads to water and
energy savings of approx. 20% by using the
spray lance.
Recommended application ranges for
switch position "eco"

Before Startup

Mount loose parts delivered with appliance
prior to start-up.
Install wheels
 Illustration
1 Push the wheels into the intake.
2 Secure the wheels using the included
plug. Align the plug properly!
Install the storage for trigger gun
 Illustration
Place the bottom holder into the recess-
es and push forward until it audibly
locks in.
Insert the top holder and push down all
the way.
Install the transport handle
 Illustration
Place the transport handle into the in-
take until you feel resistance. Use the
heel of your hand or a soft rubber mallet
to position it.
– 8