Codes; Add/Change And Delete User Code - Bosch AMAX panel 4000 Guia Del Usuario

en | Codes
20
8

Codes

8.1

Add/Change and Delete User Code

This function allows Master User to Add/change and Delete User Codes.
How to Change the Code, User Code Priority and Area Assignment
LED Keypad:
a) Enter your User code + [5] [4] and press [#].
It beeps twice and the STAY and AWAY indicators start flashing.
b) Enter the user number (1-64) and press [#].
It beeps twice.
The corresponding Keypad indicator will light up for the current user permission level.
When AWAY and STAY indicators are flashing user permission level = 0.
c) Enter the user code priority (0-5) and press [#], there are no beeps to confirm the
operation.
00 = Master User
01 = Super User
02 = Basic User
03 = Arming User
04 = Duress User
05-15 = No Permission
Refer to Quick Keypad Operation Instructions, page 5
d) Enter the first value (00-71) for the area assignment for this user and press [#], there are
no beeps to confirm the operation.
The corresponding Keypad indicators will light up.
Enter the second value for the area assignment and press [#], there are no beeps to confirm
the operation.
The corresponding Keypad indicators will light up.
Please contact your installer for the right Values or check Table in Quick Reference Guide.
e) Enter the new user code (Default code length=4 digits / 5 or 6 digit code must be enabled
through the installer) for this user and press [#].
It beeps twice and the STAY and AWAY indicators stop flashing.
Text Keypad:
a) Enter your code and press [5] [4] [#].
It beeps twice and the STAY and AWAY indicators start flashing.
b) Enter the user number (1-64) and press [#].
c) Enter the user code priority (0-15) and press [#].
00 = Master User
01 = Super User
02 = Basic User
2013.07 | 03 | F.01U.267.114 User Guide
AMAX panel 4000 / AMAX panel 4000
Bosch Sicherheitssysteme GmbH
EN