Identification Label; Instructions For Use And Maintenance; Packaging, Storage, Handling And Transportation; Packaging - battioni Pagani GARDA 3500 Manual De Instrucciones De Uso Y Mantenimiento

Setting the pace since 1953
Centrifuge
GARDA 3500
GARDA 6500
LEDRA 6500
Table 1

1.1 IDENTIFICATION LABEL

Each combined group is supplied with an identification label, indicating:
- combined group model
- serial number
- production year
- max relative pressure
- max vacuum
- max absorbed power
- max r.p.m.
- max rate of flow
- weight
Each identification plate is protected by a special film, to remove after painting.
This film has been introduced to guarantee the tracing of the pump for warranty purposes.

2 -PACKAGING, STORAGE, HANDLING AND TRANSPORTATION

2.1 PACKAGING

The GARDA and LEDRA combined groups are supplied unpacked. On request the following packaging can be used:
• cardboard boxes, for individual packaging;
• wooden base and shrink-wrap;
• wooden cases and shrink-wrap for shipment by sea or air.

2.2 STORAGE

For correct storage of the combined groups, they must be
kept:
• indoors, sheltered from adverse weather conditions;
• resting horizontally on the four feet.
2.3 HANDLING AND TRANSPORT
Weight of the GARDA and LEDRAcombined groups: (see Table 1).
The combined groups must be:
• Harnessed by means of metal hooks inserted in the hole for gripping, or a sling;
• Lifted by means of a forklift truck (if on a pallet), bridge crane, crane.
The combined groups are supplied with a guard that is in compliance with EC directives. This guard should be
installed by the fitter using the screws supplied.
for use and maintenance of the combined groups for the GARDA / LEDRA series
MAX capacity with jet
with ø 34 mm nozzle
l/min
1600
2100
2100

INSTRUCTIONS FOR USE AND MAINTENANCE

Working rate Head
max rpm m
540 1000 38
540 1000 70
540 1000 70
instructions manual
Power at max
Weight kg
vacuum kW (HP)
24 (32,2) 104
60 (80,4) 132
60 (80,4) 135
IDENTIFICATION PLATE
WITH PROTECTIVE FILM FOR PAINTING
PROTETTIVA PER
VERNICIATURA
p. 23