Sime SHP M PRO Manual De Instalación página 113

9) For remote shut down:
CN5 CN28
CN21
CN25
CN32
S1 S2
CN29
CN4
S3
CN42
CN22
1 2 3 4 5 6 7 8 9 10
13 14 15 16 17 18 19 20 21
CN11
CLOSE: SHUT DOWN
CN8 CN6 CN24
CN23
CN13
CN37
CN15
CN38
CN18
CN64
CN27
CN33
SW9
CN17
11 12
1 2 3 4 5
22 23 24
6 7 8 9 10
CN30
10) For smart grid:
The unit has smart grid function, there are two ports on PCB to
connect SG signal and EVU signal as following:
CN5 CN28
CN21
CN25
CN32
CN29
S3
CN42
CN22
1 2 3 4 5 6
13 14 15 16 17
CN11
1) SG=ON, EVU=ON.
If DHW mode is set available:
●The heat pump will operate in DHW mode firstly.
●TBH is set available, If T5<69℃,TBH will be turned on forcibly
(The heat pump and TBH can operate at the same time.); if T5
≥70℃, TBH will be turned off.(DHW=Domestic Hot Water, T5S
is the set water tank temperature.)
●TBH is set unavailable and IBH is set available for DHW mode,
as long as T5<59℃,IBH will be turned on forcibly(The heat
pump and TBH can operate at the same time.); if T5≥ 60℃, IBH
will be turned off.
2) SG=OFF, EVU=ON.
If DHW mode is set available and DHW mode is set ON:
●The heat pump will operate in DHW mode firstly.
●If TBH is set available and DHW mode is set ON, If T5＜
T5S-2，the TBH will be turned on ( The heat pump and IBH can
operate at the same time.); if T5≥T5S+3，the TBH will be
turned off.
●If TBH is set unavailable and IBH is set available for DHW
mode ,If T5＜T5S-dT5_ON, IBH will be turned on ( The heat
pump and IBH can operate at the same time.); if T5≥Min
(T5S+3,60), the IBH will be turned off.
3) SG=OFF, EVU=OFF.
The unit will operate normally
4) SG=ON, EVU=OFF.
Heat pump,IBH, TBH will be turned off immediately.
42
CN8 CN6 CN24
CN13
CN37
CN15
CN38
CN18
CN64
CN27
S1 S2 CN33
CN4
SW9
CN17
7 8 9 10 11 12
1 2 3 4
18 19 20 21 22 23 24
6 7 8 9
CN30
CN23
5
10